How to glue liquid wallpaper on walls correctly?

On the domestic construction market in the lasttime unprecedented popularity acquired liquid wallpaper. They replaced the traditional paper coating for walls and were immediately appreciated by consumers. The process of applying liquid wallpaper to the walls does not require any special skills, any person who has ever had a construction tool in his hands can do it. Liquid wallpaper is a mixture of silk, cellulose andcotton with the addition of glue and colored dyes. Information on how to glue liquid wallpaper, is contained on each package with this product, but many home craftsmen doing house repairs on their own, it is not enough. In order for the renovated walls to delight the views of the inhabitants of the apartment with their ideal appearance, it is necessary to understand all the subtleties of applying this type of finishing material to the walls.

Features of liquid wallpaper

The structure of the fibers of liquid wallpaper is satisfieddifferent, in addition, you can mix fibers of different sizes and shades with each other. Externally, the liquid wallpaper does not look like its paper counterpart. They are sold not in the usual rolls, but in packages. Opening the packaging with the finishing material, you can see a dry mass resembling soft filings of a small size. These sawdust include cellulose fibers, silk or cotton, dyes and glue. Liquid wallpapers are completely harmless, they do not attract dust, which makes them ideal for living areas where allergies live. The finishing material after application on the walls acquires a microporous structure, which provides the room with additional protection against cold and extraneous noise. Finishing material does not absorb moisture and therefore can be used not only in living rooms, but also in the kitchen and bathroom (in rooms with high humidity it is recommended to cover it with a layer of acrylic lacquer). This type of wall cover is suitable for office premises. Thanks to a wide range of colors, you can choose any shade of liquid wallpaper or combine several different tones on one wall at the same time. The merits of the product can also be attributed to the fact that it allows you to hide the small flaws of the walls, so it can be superimposed even on surfaces that are far from perfect. Before the application of liquid wallpaper wallprimed for better adhesion of the wall surface to the mortar. As you can see, liquid wallpaper has nothing to do with paper webs, so the technology of applying them to walls will also differ from traditional ones. The word "glue" to this product is not very suitable, since after dilution with water it will acquire a rare consistency and will become similar to paint. After drying on the wall, the solution will resemble vinyl wallpaper. Before you start working with this kind of finishing material, the master should acquire all the necessary tools and devices, as well as pre-prepare the walls for application of the composition. Back to contents</a>

Preparing walls for repair

To work with liquid wallpaper you will need:

• dry composition;
• large plastic container;
• water;
• spatula or gun for liquid wallpaper;
• roller;
• sandpaper;
• primer.

The dry mixture is diluted with water in accordance withinstructions to the consistency of thick sour cream. Before gluing. For this, old wallpaper is removed from them (to facilitate the process, the paper web can be moistened with water). From the walls you need to get all the nails and other foreign objects. The walls must be examined for the presence of fungus: if mold is found, it must be treated with an antifungal agent, otherwise it will in the future also hit the new wall covering. Once the walls are completely dry, sand them with coarse sandpaper. The last stage in preparing surfaces for applying a finishing coat will be their priming. It is necessary to eliminate cracks, depressions and other defects in the walls and to ensure in the future better adhesion of the working base to the material. The use of a primer will also help to reduce the consumption of liquid wallpaper. It is best to cover the walls with concrete contact, alkyd primer or deep penetration mixture, as they are ideally combined with the finishing material. Apply the primer with a spatula and allow it to dry completely. After that, you can start decorating the walls. Back to the table of contents</a>

Preparation of solution and its application on the working surfaces

A solution of liquid wallpaper is applied to the wall using a spatula with a layer of about 5 mm., Leveled and rolled with a roller. To work with liquid wallpaper you need to approach very responsibly.

To begin with it is necessary to mix in pure capaciousthe contents of the packet with water at room temperature and cook from these two components of the solution. Mix the wallpaper in accordance with the instructions attached to them, gradually pouring water to dry cellulosic sawdust. The process of preparing liquid wallpaper should be hand-held, using a construction mixer for this purpose is not necessary. After mixing, the mass is covered with a polyethylene film and allowed to stand for several minutes (the exact time is indicated in the instructions). The finished solution should be homogeneous, reminiscent of the consistency of thick sour cream and easily applied to the surface of the wall.

How to glue liquid wallpaper? Their small portions are applied to the primed working surface with a spatula and carefully spread over it with a thin layer (no more than 5 mm). If the layer of the solution is very thin, then a wall will be visible through it. Liquid wallpaper applied by a thick layer (about 1 cm and more), after drying can give cracks. To ensure that the wall turned out to be perfectly even, the wallpaper after the application is rolled with a roller.

Instead of a spatula, you can useprofessional gun for liquid wallpaper. With its help, you can quickly and effectively apply a solution to the walls, but this tool will have to be bought separately.

If during the repair on any sitewall mixture will lie unevenly, it can easily be removed with a spatula, moistening the previously spoiled surface with water. On the cleaned wall it is necessary to put a solution anew and to level it with a roller.

If desired, you can create patterns on the surface of liquid wallpaper. To do this, after the process of distribution of the mixture on wet walls is carried out by a roller, on which a relief pattern is applied.

Liquid wallpaper should dry for 1-3 days at room temperature not less than 10 degrees Celsius.

Apply colorless acrylic lacquer to the wallsonly after the solution on them completely solidifies. Varnish is necessary in rooms with high humidity. In the living rooms without it you can do without.

Having become acquainted with how to glue liquid wallpaper,You can create an exquisite interior indoors without much effort. This finishing material is so universal that it will look harmonious in all rooms, regardless of their destination. </ ul>

Comments

Comments