Among the many facing materials,offered by the market, paint is the most popular at present among residents of cities and villages. Painting the walls inside and outside the house is the most affordable and practical way to decorate the interior. A simple and unremarkable method of cladding in skillful hands can make the interior of the room beautiful and individual. Many tenants often have a question: how to be beautiful, so that it is original and unusual?
Wall painting scheme. Modern paint is produced for interior and exterior works. It dries quickly, has a bright color range, does not have a sharp and unpleasant smell, it is easy to work with.
Scheme for calculating the required amount of paintfor painting walls. Inside the house you can beautifully , floors, ceiling, windows and doors. Even more often than inside, paint is used for outdoor work. They paint the fence, walls, roof, street buildings. Painting the walls in the house requires their preparation, priming and, in fact, painting. To perform these works, materials are purchased:
- putty;
- primer;
- paint.
Tools required:
- roll of paint tape;
- fine-grained sandpaper;
- large and small spatula;
- different sizes of paint brushes;
- paint roller; ladder;
- paint mixing tank.
Original methods of painting
Striped wall painting scheme.Original and effective methods of painting walls using improvised means allow you to get an unexpected and beautiful result. One of the effective methods is applying paint using a car wash sponge (not foam rubber). First, paint the wall with the main color, let it dry. Soak a new sponge in water until it swells and squeeze it well. Dip the sponge in a water-based composition of the required shade, which should differ from the main color, apply it, lightly touching the surface to be painted. Apply the sponge with one touch, do not pick up a lot of paint at one time. After the applied layer dries, you can apply paint of a different color. The main layer can be covered with a sponge of several shades, letting them dry before applying the next layer. Applying paint with a cotton or linen piece of fabric gives a unique effect. The surface is covered with the main color. After the base has dried, 1 m² of the surface is painted with a lighter shade of paint using a regular medium-width brush. While the applied layer is still wet, a piece of fabric rolled into a tube is rolled over it. The piece is taken small so that it does not soak into the paint, and it is changed frequently. Then the next 1 m² of the wall is painted and the same manipulations are carried out with a tube of fabric. Return to contents</a>
Technique of factoring and milling
Scheme of paint application using a spray gun.The texture method allows you to get a beautifully painted wall with an interesting surface. Its essence lies in applying a coating of a different color to the main dried layer with a medium-width brush. The strokes are applied in different directions. Then take a texture brush with hard bristles or a shoe brush and apply small blows (pokes) to the freshly painted surface. The paint is constantly wiped off the brush. Beautiful painting of walls is achieved by the frottage method. According to this method, the surface is covered with a paint and varnish composition of the main color with the addition of glue. A newspaper is placed on a slightly dried layer and lightly crumpled, and then the newspaper is removed. The entire surface is treated in this way. Polyethylene can be used instead of newspaper, but the effect of its use is much worse. The paint rubbing method allows you to get a beautifully painted surface. The wall is covered with a composition of light shades or white. Allow time for the base to dry. On top of it, paint of a contrasting color is applied to a small area of the surface. Without letting it dry, apply strokes with a dry brush in different directions. The paint that sticks to the brush is constantly removed with a rag. This method can be used to make several layers on the main tone. You can get beautifully painted relief surfaces using a ready-made structural paint and varnish mixture. It has a thick consistency and contains special fillers. The structural mixture is used as a finishing coat or as a base for other types of decoration. This paint allows you to create an imitation of a wall made of natural materials. It is applied with a felt or foam roller in one layer.</ ul>
