Walls

How to paint striped walls: a sequence of actions

1

One of the newfangled design trendsthe interior is striped on the walls. It would seem that there is nothing more elementary and simpler than a line drawn directly. In fact, painting striped walls is not an easy thing to do. You can make sure of this if you carefully study the instructions before stripping. Scheme for painting walls in stripesScheme of painting walls in stripes. If there is an intention to see the walls striped, it is important to pay attention to the fact that the different arrangement of the bands on the wall will be perceived in completely different ways. So, the vertical bars will visually increase the height of the wall surface between the ceiling and the floor, while the horizontal stripes will give a sense of freedom and spaciousness. In other words, painting walls in stripes involves choosing:

  • the direction in which it is preferable to see the bands on the walls in the room;
  • The places where the bands will be placed (on the whole surface or on one wall);
  • effect from the action - a visually high or spacious room.

We paint the walls in stripes: preparation for the main works

Schemes of drawings of vertical and horizontalbands. The first step is to analyze the existing surface, on which it is planned to place the lines. The surface texture can also be painted (water-based paint, enamel, etc.), paper (wallpapered with wallpaper) or something else. Whatever the surface, it should first be prepared: cleaned of dirt (dust, cobwebs), remove old wallpaper, if necessary, repair plaster defects, remove flaking paint. Then apply a primer and allow time for it to dry. Back to contents</a>

Choosing the design of bands

Number of straight lines, their width and colorentirely depend on personal preferences, creative imagination and, to a large extent, on opportunities. Variants of how the banded composition will be located, there is a mass, ranging from one strip around the entire perimeter and ending with wide stripes from floor to ceiling (from angle to corner). Single lines are a widespread technique, they are often used to separate a panel area. Originality is different pattern, formed by different shades of one color segment. It is better if shades gradually and successively replace one another, starting from light to dark, and vice versa. If you darken the bottom, the illusion of the bowl will be created, with a darkened top - a pyramidal effect. Wall painting scheme. Color bands are chosen, more relying on their own taste and interior parameters. It is necessary to take into account some undesirable moments, which can be obtained quite unexpectedly, experimenting with chromaticity. For example, if the lighting in the room is muffled, then the cool tone of blue will give the impression of an unattractive "gray" situation. Warm colors - peach, apricot, caramel. Their colors as companions are turquoise, sea waves. Looks beautiful combination of burgundy, beige and pink flowers. It is not always appropriate to use a lot of narrow stripes. Especially if each of them has its own shade. For the visual perception, a sensation of apparent color saturation will be created. In this motley space, the feeling of a comfortable stay in it is unlikely to arise. It is necessary to decide in advance which interval will alternate lines, and also set the sequence of the composition in color. Back to contents</a>

We paint walls in a strip independently

Own painting of walls in a line by forcemost people, but not every home master is aware of the existing subtleties of coloring surfaces with a striped pattern. To simplify the task, we describe the entire sequence of actions in the most detail. Rollers for painting walls. For work you will need to prepare:

  • measuring tape for measuring;
  • potholed cord (or a string of light color);
  • color crayon for pigmentation of twine;
  • a simple pencil;
  • many buttons;
  • the level of the builder;
  • shallow bath of plastic;
  • short-roller;
  • Painting tape;
  • fly brush;
  • rags.

Painting walls in a line is best done withpartner. As this will affect the quality of the work performed, and so it is necessary for safety. One can also do everything, but the procedure will be carried out without hydro level. Instruction for work:

  • Taking the tape measure, measure the right width for the strip.
  • From one corner of the wall to the other, stretch andfasten with buttons a padded cord or a colored twine twine. With the help of the level, the plane is verified. If everything matches, pull the center of the cord a couple of centimeters and release. The line marked on the wall in this way will act as one of the boundaries of the future strip. These actions are repeated as many times as necessary.
  • Paint the tape along the resulting boundary notation. This method allows you to create a clear and uniform demarcation, and when staining eliminates the formation of streaks.
  • When staining, the main actions are performed with a roller, correcting with a brush.
  • After waiting for complete drying of the paint, the paint tape is torn off the surface of the walls.
  • If the bath is alone, what do they do? Of course, before filling it with paint stylut inward polyethylene or foil. After working out one color, the film is removed from the tray and discarded. In place of the previous stew new under a different color paint. After studying the subtleties of how to paint the walls in stripes, you can safely get down to work. Successful repair!

    Comments

    Comments