Everyone wants to create a cozy and stylish houseinterior. After all, a house is a place where a person rests, spends time with family and friends. The interior of the apartment is the face of the owner, and the furnishings in the house speak not only of the owner's prosperity and its status, but also about the taste. 
The border must be glued on already driedwallpaper. Wallpaper has been the most widespread and demanded option for wall decoration in residential premises for many years now. And this is not surprising, because the assortment of material includes a large selection of colors and patterns. At the same time, wallpaper is an affordable material at a price where every consumer will find an affordable type of material for himself. Environmental friendliness and ease of use are important advantages of wallpaper. In order to bring to life the original design of the premises, there is absolutely no need, which are very expensive. Even with cheap wallpaper, you can emphasize the style if you use an original border.
How to properly glue wallpaper
Wallpaper sticker by one person. Many people are wondering how to stick wallpaper in the room neatly and quickly. In fact, the process will not cause difficulties if you follow certain recommendations. Before you glue wallpaper, you need to prepare a room for future work. Remove from the room all the furniture that you can interfere with during work, leave only a few stools and a table, which is desirable to cover with cellophane, so as not to stain. Then remove all old materials from the wall surface. The previous material can be washed off using water and a rag, in particularly difficult places a metal spatula is useful. Old paint from walls can be removed with a special solvent. Back to contents</a> Preparing the walls 
Preparing the walls for wallpapering. Pay attention to the condition of the walls. If there are cracks or irregularities on the plane, they should be removed before gluing the wallpaper. In order to paste wallpaper with a curb and get not only a flat surface, but also a reliable coating for many years, the surface of the walls must be plastered and leveled. Just before gluing wallpaper, the substrate should be primed with a special mixture. This will enable better connect the material with the wall surface. You can glue the canvas with the border or without them. It depends on your personal preference. Curbs give the interior a more complete look, but before you start to paste them, you need to paste the wallpaper. When starting to work, open the rolls and check for any defects on the material. If you choose wallpaper with an ornament, then, while still in the store, check the match of the picture, all the material must go from one lot. In the event that you decide to decorate the surface of the walls with curbs, immediately select them in the kit to the wallpaper. Wallpaper gluing is not difficult, the main thing is to observe a number of simple recommendations. 
Procedure for wallpaper gluing. First, cut the stripes according to the size of the walls, leaving a margin of ten centimeters. Lay out the canvas on the floor surface with the face down. Often, the adhesive is applied to both the surface of the wall and the surface of the wallpaper. But depending on the kind of material you choose, before you glue the wallpaper, you should carefully study the instructions. Begin to glue the wallpaper from the corner, which is located at the doorway. After placing the canvas on the plane of the wall, press it gently. After that, carefully level the surface with a metal spatula at the top at the base of the ceiling and gradually move downward, smoothing the irregularities. The excess paper is cut off with a knife. All subsequent strips of material are glued on the same principle, keeping the pattern on the wallpaper. It is best to use the overlap method, this will make it possible to avoid divergence of the seams. If excess glue appears during operation, it must be carefully removed so as not to smudge the surface of the material. After the entire perimeter of the room is covered with wallpaper, you can proceed to pasting curbs. Depending on the chosen wallpaper material, the borders can be glued both on top of them, and directly on the wall surface. If you chose wallpaper with a relief texture, then where you want to place a border, you have to clean the surface of the wall from the material. Back to contents</a>
How to choose a border for wallpaper?
Combined wallpaper wallpapering. At its core, the curb is a paper strip, which is used to create the desired effect in the interior. With his help, you can give the decoration of the room a complete view, limit any zone, increase or decrease the visual space of the room. You can paste a curb on the old wallpaper, in order to somewhat revive the boring interior. To paste a curb on the wallpaper, does not need to clear the room from furniture and conduct special preparatory activities, it is enough to free up the necessary space for work. Curbs can be of any shape and size, they differ in their design and ornamentation, so everyone will find what they need for themselves. Often they are sold together with wallpaper, but if there was a need to purchase a curb separately, then choose it should be based on a combination with the color, texture and style of the wallpaper. It is possible and independent production of wallpaper stripes, they can be cut out of wallpaper material, this will allow not only to achieve the most harmonious combination, but also will enable to paste a curb of the necessary width. 
Scheme of calculating the area of the room for gluing wallpaper. On the market of building materials, you can find the following types of curbs:
Back to contents</a>
How to paste a border for wallpaper?
Before you glue the material, you need toprepare all the tools and materials that you might need in the process of work. Glue the border should be on a special adhesive, which allows for a strong connection of surfaces. 
Tools for wallpaper gluing: scissors, bucket, brush, roller, scissors, stepladder, paper knife, rag and others. Such glue can be found in specialized building stores, it is released in cans or tubes. In addition to glue, in the process of work you will need:
- scissors;
- roller;
- brushes of different sizes;
- a wallpaper brush;
- building level;
- Ruler;
- putty knife.
Before you paste a curb, think about itthe site in which it will be located. Here one should rely on personal preferences and wishes. Place of adhesion should be cleaned of dirt and debris. The surface of the wall, where the curb will be, should be without any defects, such as cracks, dents or chips. If the base of the wall has unevenness, then they will be visible through a thin layer of curb. On the plane of the wall, you should draw a pencil point, using the building level. The marked marks must be connected by a line. This will help you determine the position of the curb. In order to work it was more convenient, it is necessary to roll a curb along the wall where the work will be done, and cut the canvas into pieces of the necessary length. Place the curb on the floor face down, as the glue will be applied to the wrong side. After the glue is applied to the prepared surface. Glazed with glue curb can be folded accordion so that the wrong side was inside. The folded canvas should be taken in hand and, gradually spreading the folds, lay the material on the wall surface. It is very important to smooth out any irregularities and jaggies in the direction from the middle of the material to the edges. If glue has appeared at the time of gluing, these excess should be removed with a cloth. It is better to paste the border into the joint. In the corner zone, overlapping curb strips must be applied. Therefore, try to glue so that the end of one strip goes to the next wall. This will make it possible to avoid a gap in the corner zone. Sometimes curbs are used to frame a window or doorway. This solution creates a kind of zest in the interior, focusing on windows or doors. The problem with gluing curbs is that the junction of the curb strips should be cut straight and be connected at an angle of forty-five degrees. In the joints, the stripes overlap. The problem may be the presence on the canvas of a certain complex pattern. In order to connect neatly two strips, put a spatula diagonally and cut through both canvases. Carefully remove the excess part from the horizontal fabric and, having bent the edge off edge, remove the cut off section from the vertical strip. Then the edges return to the set position and the irregularities are smoothed out.
