Self-installation of interior doorsis a complex process, since the final result depends on how accurately the sequence of necessary actions is followed. If you follow the existing , you can decorate the interior of your own apartment or private house with this design.
Construction of interior door.
How to install interior doors with your own hands: instruction
The doors will need to be installed afterpre-finishing will be done. The walls need to be leveled, putty and plastered. All dirty work must be completed before installing the door. If the room is not dry, the door frame will warp from dampness. You will need to lay a subfloor and decide on the type and thickness of the finishing base. This is necessary for the correct installation of the door frame according to the height of the threshold. Return to contents</a>How to choose a door leaf and all the necessaryelements? In construction supermarkets and specialized stores, you can find doors for every taste. All of them have an almost perfect appearance. The situation is worse with the sizes. You can buy a canvas whose sides will differ from each other by 2-5 mm. During installation, this difference of several millimeters will create significant difficulties. Therefore, it is recommended to measure the canvas you like right in the store. You should make sure that they prepare exactly the one that was measured. The next step is to purchase a door frame. There are designs that come complete with a frame. In this case, markings for hinges are provided, all dimensions are maintained by the manufacturer.
Types of interior doors by opening methodIf the door leaf is sold separately, you can make the box yourself. It is a U-shaped structure made of bars. It consists of several posts and a horizontal crossbar, which is called a lintel. When choosing bars, you will need to ensure that they are even and without knots. The thickness of the box bar should match the thickness of the door leaf. This must be taken into account, since otherwise it will not be possible to install the structure. To ensure a high-quality result, you will need to prepare a professional tool. However, this is an expensive option. If you use simple devices, the required accuracy may not be maintained. Today, you can find a fairly large number of companies on the construction market that rent out any tools for a small fee. Therefore, it is recommended to rent a circular saw. To install the door yourself, you will need to prepare the following elements:
Classification of interior doors according to various features
- A chisel;
- a hammer;
- screwdrivers;
- roulette;
- stool;
- building level;
- hacksaw;
- circular saw;
- Screwdriver;
- perforator or electric drill;
- electric milling cutter;
- door hinges;
- locks with latches;
- cant;
- Blades;
- self-tapping screws;
- nails;
- building foam.
Return to Contents</a>Making a door frame with a threshold by yourselfby hand Particular attention should be paid to the process of manufacturing the door frame. If any deviations are allowed in the assembly of the structure, problems may arise during operation. In the worst case, you will need to purchase new material. If the interior door is planned to be installed in the opening of the partition between the rooms, then you can build a U-shaped structure. To do this, you need to prepare several bars:
Methods of door fastening.
- feigned stand;
- loop bar;
- lintel.
If you plan to make a base with a threshold, thenyou will also need to purchase a lower bar-strip of the same thickness as all the other elements. In this case, the assembled box will resemble a rectangular structure. The lower bar must be cut at an angle of 90° to the door frame with a threshold. To take accurate measurements, you will need to insert the door leaf into the box installed on the floor or on several adjacent tables. To clearly maintain the technological gap along the entire perimeter, you should use a strip of packaging cardboard, which should be located between the box bar and the door leaf. The structure is secured using several self-tapping screws. The same actions can be done to saw off the racks. You will need to carefully tighten the bars to prevent movement. The cutting point is calculated taking into account the gap between the base of the floor, in this case between the upper line of the threshold and the door leaf. The thickness of the bar that will be used as a threshold must be added to the established gap size. Return to contents</a>Installation of racks and hinges The most responsiblethe process is to install the racks. If the frame is not level, the door will also not be installed correctly. In this case, you will need to do the following:
The installation of door hinges must be approached with careresponsibly. It will be necessary to maintain the exact dimensions of the distance from the top and bottom of the canvas and the depth of the recess. The order of actions in this case will be as follows:
Tools for installation of interior doors.
Return to Contents</a>How to install a door frame? To install the frame, you will need to do the following:
Sectional view of door frame installation.
The next step is installation.platbands. You will need to saw off a 45° angle and secure them. These devices can be secured using adhesive, finishing nails or self-tapping screws. Later, the nail heads need to be sanded down and decorative plastic caps put on the self-tapping screws. Return to contents</a>Nuances to consider To assemble the structure efficiently, you will need to pay special attention to the following actions:
The thickness of the purchased bars should not beless than the thickness of the web. Measurements are taken using a tape measure. The detected deviations must be taken into account in further work. The points for sawing off the vertical posts are located on the inside of the bar. Speaking about how, you should know that the installation can be done correctly only if the sequence of actions is followed.
