Choosing materials for your home is a matter ofresponsible. After all, the durability of the entire structure depends on how strong the products are. For example, wallpapers differ in appearance, texture and quality. In addition, their installation technique differs. To glue wallpaper, you need to choose the right tools. For example, satin fabric is a heavy material for walls.
It is recommended to hang wallpaper during the warm season.
What does satin wallpaper look like?
This material is in great demand amongmany masters. Wallpaper is a heavy vinyl coating. Some experts call the products silk-screen printing. After all, wallpaper has a smooth surface. The appearance of the texture resembles silk material. Satin wallpaper can be patterned or shiny. Some manufacturers offer single-color compositions. In any case, the appearance of the products gives the interior a luxurious and original look. The wallpaper pattern appears due to hot stamping. Some types of materials resemble elegant and expensive fabric. Therefore, the canvases are often used in the decoration of luxurious establishments and stylish homes. A big advantage of wallpaper is its durability and strength. The surface of the material can be not only smooth. Modern product designs are diverse. Satin wallpaper can be matte, with the addition of shimmering particles and mother-of-pearl. Wallpaper is easy to clean. If dirt or dust has accumulated on the surface, you can wipe the base with a damp cloth. Due to its availability and ease of use, satin is one of the common materials. Return to contents</a>
Preparation of walls for work
Structure of vinyl wallpaper.Before gluing wallpaper, it is necessary to clean the surface. Satin products can emphasize all the unevenness of the walls. Therefore, it is necessary to take this nuance into account when finishing work. At the first stage, it is recommended to remove the old coating from the walls. To do this, the surface must be moistened. It is recommended to use warm water for this purpose. In this state, the walls are left for 10-15 minutes. During this time, the coating will absorb water and become pliable. Then the products are removed with a metal spatula. The remaining debris can be cleaned off with a stiff brush. If the surface is painted, it is recommended to wash the walls before the main work. A clean concrete base should be plastered. Thus, all cracks and unevenness will be hidden. Experts recommend treating the walls with a primer. These manipulations will help to increase the service life of finished structures. The primer will protect the base from moisture and condensation. The finished product can be purchased at any hardware store. Return to the table of contents</a>
How to properly glue wallpaper?
Scheme for gluing wallpaper in the corners of a room.In order for the canvases to be firmly fixed, it is recommended to glue satin wallpaper in the warm season. For example, in the summer. Windows should be tightly closed. This way, you can avoid temperature changes. The reading on the room thermometer should vary within 20°C. Before gluing the wallpaper, you need to prepare the tools:
- rubber roller;
- building level;
- special glue;
- brush;
- knife;
- scissors;
- Ruler;
- rag;
- container for glue.
The adhesive must be selected exclusively forvinyl products. There are also universal products. They can also be used for the job. The adhesive composition must be diluted with water. For this, use a capacious container. The proportions of the consistency must correspond to the instructions. The material must be carefully measured and cut. For these purposes, it is recommended to leave a stock of 7-10 cm. If the products contain a pattern, then it should comply with the permissible rapport. The fragments must be matched and the cut location marked. You can start gluing satin wallpaper from the window. The adhesive mass is applied to the wall and material. It is recommended to do the procedure with an assistant. The upper part of the canvas is tightly fixed. After this, the remaining product is carefully straightened. The procedure can be done using a rubber roller. When performing work, you need to monitor the position of the wallpaper. Using a building level, you can check the perpendicular position of the materials. When applying glue or liquid, satin can stretch. Therefore, it should not be deformed. Wallpaper is fixed end-to-end or with a stock of 1 mm. Using smooth movements from the center, it is necessary to remove the accumulated air under the canvas. After the main work is done, it is necessary to cut off all the excess parts from the silk-screen printing. This procedure can be done with a sharp knife. At the end of the installation, you can decorate the interior with ceiling plinths or decorative baguettes.
