При проведении капитального ремонта в каком-либо one of the most important events in the room is finishing the ceiling. This is due to the fact that the ceiling is always in sight, so it should look beautiful and stylish. Whatever material you choose for cladding, before starting its installation, you need to remove the old finish from the ceiling, which is often whitewashed with chalk or lime.
The snow-white ceiling in the living room looks beautiful and stylish.
Preparatory work
Removing old whitewash is a rather labor-intensive operation, for which you may need the following tools and materials:
Removing whitewash from the ceiling: a - using paste; b - using a spatula.
- stepladder or table;
- putty knife;
- spray;
- paint roller with foam surface;
- work clothes;
- building glasses;
- respirator;
- several water tanks;
- warm water;
- polyethylene film;
- mounting scotch;
- foam rubber sponge.
Before you start from the ceiling, you need to decide,where to put furniture from a room to protect it from debris and dust. In a private house, you can get out of this situation quite simply: take the furniture outside. Apartment owners, if the living space allows, can move the furniture to another room. In case of limited free space, all furniture should be covered with old newspapers, wallpaper or plastic film.
Stages .It is also recommended to protect floors in a similar way, otherwise you will have a hard time washing them from dust that has eaten into all the cracks of the floor covering. All lighting fixtures located on the ceiling should be dismantled. To organize lighting, you can use a temporary fixture or install a regular socket with a lamp. To protect windows, they should also be sealed with polyethylene film, which is glued with tape to the window frames. In the room where the repairs will be carried out, wet rags should be laid near the entrance door. This will not only allow you to wipe your shoes when leaving the room, but will also be a kind of barrier to dust. Return to the table of contents</a>
Removing whitewash in the traditional way
After the room has been preparedfinished, you can start the main work. While on a table or stepladder, use a sprayer to evenly moisten the entire finishing surface with warm water. After this, you need to wait 10-15 minutes for the whitewash to absorb the moisture, and spray the ceiling again.
The remains of old whitewash must be washed off with soapy water.water using a sponge. Then remove the old finish with a spatula. If the whitewash flows down the spatula, it means that you have over-wetted the ceiling. In this case, you need to wait a little longer for the ceiling to dry. If the whitewash is dusty when removed, it should be additionally moistened. All cracks that are present on the ceiling should be widened with a spatula, which will allow them to be repaired more efficiently in the future. in one part, it is necessary to periodically wet the other. This will ensure the continuity of dismantling work. After you have removed the whitewash from the ceiling, it should be washed several times with warm water using a paint roller or foam sponge. Do not wet the working tool in a large container, so as not to contaminate all the water at once. It is better to pour a little water from a larger container into a smaller one and wet the sponge in it. After the ceiling has dried, it is necessary to check that the work has been performed correctly. To do this, run your palm over its surface and see if there are any traces of whitewash left on it. If the hand is clean, the work is done well. Return to contents</a>
Other ways to wash whitewash from the ceiling
When considering how to wash whitewash off the ceiling, it should be noted that there are other effective ways to carry out this operation:
When cleaning the ceiling from old whitewash, be sure to wear protective glasses.
The following methods are given for cleaning whitewash from the ceilingdo not guarantee a 100% result. You will still have to additionally wash off the remains of the old finish with a foam sponge soaked in water. Once you have succeeded, you can begin to level it, and then whitewash, paint, wallpaper or use other finishing methods again.
