- simple process.The main thing is to follow a certain sequence and accuracy in dimensions. Having chosen a suitable door and prepared the necessary inventory, you can start doing the work.
The principle of installation of interior doors.
Material selection
The first characteristic that is worth paying attention to ispay attention to the material from which the door leaf is made. The durability and practicality of the installed door will depend on the material. Today, various materials are used for production, so each product has its own advantages and disadvantages.
Tools for installation of interior doors.Fiberboard doors are a wooden frame covered with laminated fiberboard on top. The main advantage of such a door is its low price, which attracts a large number of buyers. Such products are presented in a huge assortment on the market today. This will allow you to choose the necessary option for any style direction in the interior. Due to their light weight, such products can be hung on hinges yourself. Such products are not recommended for installation in rooms with high humidity, since they deform under its influence. Low strength is another drawback. With minor mechanical impact, laminated fiberboard can be damaged. Doors with MDF are the best value for money. Such models have a higher level of sound insulation, unlike the first ones. In addition, they are more resistant to moisture, so they can be installed even in the bathroom. Natural wood has always been appreciated, and today wooden panels are still very popular. Such products are quite expensive and are not available to every buyer. They will decorate and complement the interior in a classic style. Return to Contents</a>
Door Box: Features
Scheme of installation of interior door.The entire load will act on the door frame. Therefore, it is worth paying special attention to the quality. The frame made of fiberboard looks good, but the strength level is not so high. Such a product can only be used together with fiberboard doors, since heavier models can damage and deform them. The door frame can be made of untreated wood. Such a frame is a dry profiled beam. This product has a small price, but quite high quality. After installing such a frame, you can even attach doors made of natural wood, which weigh quite a lot.
Table of door sizes according to GOST.A door frame of this type requires finishing, which, in addition to its appearance, will improve the technical qualities of the product. Laminated wooden door frames are available on the market. Such a product does not need to be covered with finishing, and it has higher sound insulation. In order to fully decorate the doorway, it is necessary to purchase door frames of a matching color and an additional strip. Such an addition can be purchased after the door is installed and all that remains is to install the decorative elements. Return to contents</a>
Installation of interior doors with their own hands: principles
In order to begin installation, it is worth preparing the necessary inventory:
Scheme for manufacturing a door frame.
- electric drill;
- hand saw;
- drill with 4 mm nozzle;
- Bore for concrete base 4 and 6 mm;
- Crusader, with the help of which screwing will be performed;
- Roulette and pencil for marking;
- level;
- wood screws with a size of 60 * 3.5 mm and dowels of 75 mm;
- foam mounting.
Regardless of the material it is made ofthe box, installation, i.e. the installation process, will not have significant differences. It is only worth noting that it is much easier to work with wooden products, since they are more durable and do not deform. In order to fix the box in the opening, it is necessary to use self-tapping screws. Subsequently, the distance that is formed between the frame and the opening must be filled with mounting foam. The frame can be made with or without a threshold. Before installing the product in the opening, it is recommended to make all the cuts for the hinges and handles.
Diagram of maximum clearances when installing hinges.When purchasing, the door frame has dimensions larger than the door opening. Therefore, it is necessary to take all measurements in advance and adjust the dimensions to the required ones. If the door is installed in the bathroom, it should open from the outside, since the room is too small and the door will only interfere if opened inward. The first thing to begin assembling the frame is securing the top bar. In order to secure the screws in the product, you must first make a hole with a drill from the fiberboard, the diameter of which is 3 mm. In this case, it is necessary to use screws with a diameter of 3.5 mm. This is necessary so that the box does not crack when screwing in the screws. It is worth noting right away that the screws must be located in the center of the end part of the box. In order to fasten the entire box, it is enough to use only two screws on each side. This amount is quite enough for the frame to be strong. If a laminated box is used, it must be placed on a soft surface during assembly: this will prevent damage to the decorative layer. When adjusting the frame height, you need to use a tape measure. With its help, you can measure all the dimensions of the doorway. The resulting size is transferred to the frame. It is very important to leave a gap. The structure should be additionally secured with mounting foam. The main thing is to control the dimensions during assembly and double-check several times before cutting off the required size. To cut the element, it is worth using a hand saw for wood. It is not recommended to use a circular saw: when using it, you can damage the laminated layer. Return to the table of contents</a>
Internal door: completion of work
Installing hinges on the box.The assembled U-shaped frame is installed in the doorway and adjusted very precisely. In order to align it, it is necessary to use a building level. Experts recommend hanging the door leaf on the hinges. This will allow you to see how it will open and close. This will give you the opportunity to check how correctly the hinges are installed. When the door is already installed in the working position, you can check its working condition. Dowels are used to attach the frame. If the wall is made of brick, it is very important to ensure that all fastening points are located in a solid brick. If the fastening is made in the masonry joint, the frame will hold very poorly. Screws must be tightened using a screwdriver or an electric drill. Do not tighten the screws too tightly: this can lead to deformation of the frame. After the frame is secured and checked with a level, you can finally attach the door leaf and clamp it with screws. It is very important to leave a gap of 2-3 mm around the entire perimeter between the frame and the door. The seams between the opening and the frame are filled with mounting foam, starting from the bottom and moving upwards. A correctly installed door guarantees long-term operation.</ ul>
