Question regarding what glue to useceiling tiles, is extremely relevant for those who want to do ceiling repairs. There are different types of glue, and it is very important to choose the one that best suits the specific surface.
Scheme for gluing tiles.
Features of the use of adhesive
Before you start gluing ceiling tiles,you need to buy a special glue. And for this you need to take into account the conditions under which it will be used. First of all, this applies to the intensity of the load on the glue joint after it hardens - it is assumed to be small. Both foam and polystyrene options weigh very little.
Liquid nails glue quickly and reliablytiles even on an uneven ceiling. The area of the seam will also be small. This is due to both the savings in the adhesive used and the fact that sometimes the tile material is glued to an uneven surface in order to correct existing defects. The adhesive composition must be able to fix the material without holding for a long time. This point is related to such parameters as viscosity and the degree of adhesion to surfaces. Bonding will occur on very different surfaces. This is foam plastic with plaster, concrete, a layer of lime. In other words, the adhesive must be universal. Return to the table of contents</a>
Types of adhesive composition
To start gluing ceiling tiles, you need to know what types of adhesives there are:
Marking the ceiling for gluing ceiling tiles "from the lamp".
Representatives of universal polymer adhesivesare Titan and Master. Titan glue is the most widely used. It is universal and suitable for gluing plastic, metal, and glass materials. The composition has sufficient viscosity, so the tile can be held without additional fixing measures. Master glue is similar in composition to Titan. However, it is used less often. There are reasons for this. The composition has a sharp and persistent odor, so before you start gluing ceiling tiles, you should make sure that the room is ventilated. In addition, it takes a long time for the glue to dry. There are other brands of universal glues: Eltitans, Dragon, etc. The differences in price and effectiveness between them are small.
Universal polymer adhesive for tilesSuitable only for flat ceilings. Liquid nails are a thick adhesive that can be applied in a thick layer. Due to this property, as well as low shrinkage, you can start gluing ceiling tiles even on a very uneven surface. When purchasing liquid nails, it is recommended to pay attention to the fact that the adhesive is suitable for polystyrene foam and foam plastic. After all, many adhesives contain solvents that can corrode plastic. In addition, it is advisable to purchase light-colored liquid nails. This is especially true when using thin tile options, since there is a chance that the adhesive seams will be visible. Polyvinyl acetate adhesives include PVA, Bustilat, and their analogues. This variety is assessed ambiguously. On the one hand, it does not have an unpleasant odor, on the other - it is not very viscous, which can increase the consumption of the adhesive composition. In addition, the polyvinyl acetate type of glue takes a long time to dry. This is also important to consider before you start gluing ceiling tiles. Final acrylic putty can also be used to glue tiles. It is thick and adheres well to various surfaces. Another advantage is that the light putty will not be noticeable even when using thin tiles. In parallel with gluing, it can also be used to fill the joints between tiles. Return to contents</a>
Application: useful advice
What kind of glue to use to glue tiles is not the most important point in repair work.
Options for gluing ceiling tiles.How it is done is much more important. When using Titan and similar compounds, when gluing tiles, you should press them to the ceiling, then remove them and wait about a minute. Then press the tile to the ceiling again, this time for good. This procedure will make the glue dry slightly, due to which the tile material will hold stronger. Before you start gluing ceiling tiles, you should remove the old plaster and whitewash. This can be done with a spatula. The whitewash will come off easier if you soak it in water. However, if you treat it with a penetrating polymer primer, the tile will hold well even on an uncleaned surface. It is better to coat polystyrene tiles along the entire perimeter. Due to their small thickness, they can be deformed. In addition, as mentioned above, it is better to use white glue for thin tiles. It is advisable to start gluing ceiling tiles from the corner that catches the eye when entering the room. This is where the most noticeable errors in gluing relative to the wall line will be. In case of significant differences in ceiling height, the tile will not hide the existing defects, but will only highlight them even more. In these cases, it is more appropriate to install tension/suspended structures. Thus, the question of what kind of glue to use to glue ceiling tiles is secondary. After all, the main success will depend not so much on its type as on the actions performed correctly.
