How to install curtain rods?These interior elements should harmoniously fit into the space, correspond to the chosen style, complement it or contrast slightly. The variety of curtain materials that are presented in stores can cause some confusion in the consumer, as well as the choice of curtain rod for them. When the configuration and type of all decorative elements, as well as the textile materials that will be used to decorate the window opening, have already been determined, the question arises of how to install a curtain rod. This procedure can be done independently, using the necessary tools and applying simple skills.
Types of curtain rods.
Types of eaves for curtains
Cornices can be divided by several parameters, including the material of manufacture, external configuration, and method of fastening. The material used in the production of the cornice:
- metal;
- plastic;
- wood.
Step-by-step instructions for installing a roundcornice. According to the manufacturing method, the cornice can be string or baguette. It should be borne in mind that the use of string models causes some inconvenience during further use. This is due to the fact that the metal string, which is the basis of this cornice, is not suitable for use in rooms with high humidity. If you need to use this particular model of fastening curtains, then the metal must be covered with a special spray that will be resistant to prolonged exposure to water, steam, etc. Baguette cornices are more widely applicable, are practical and quite convenient to install. You can fasten the curtains on:
- wall;
- the ceiling;
- or regardless of the surface.
Cornice designs can be:
Scheme of fastening of rail cornices for curtains.
- Single row, which can accommodate only 1 row of decorative window elements;
- double-row, they can hang curtains and curtains or other combination of 2 pieces of textiles for the window;
- three-row, on which you can place several types of curtains, curtains and other elements.
Depending on the shape of the room, cornice manufacturers offer consumers products:
- round shape;
- telescopic device;
- relief form;
- profile type;
- special, which are designed for or blinds;
- baguette form.
Some of them have their own installation features, but basically all cornices are mounted almost the same way. Return to contents</a>
Tools, materials, nuances of installation
In order to install the cornice, it is necessary to prepare the following tools and materials:
String curtain rod installation diagram.
- stepladder or ladder, which will be stable and provide comfortable access to the blinds;
- electric perforator or drill, depending on the material of the wall or ceiling;
- A drill of the required diameter, the size of which is determined by fixing dowels;
- tape measure, pencil;
- building level, with the help of which the horizontal is checked during work;
- dowels, self-tapping screws.
To ensure a secure fitcornice, and if you plan to hang fairly heavy curtains, you can additionally use special epoxy resin or liquid nails. They are added to the hole before placing the dowel there. After hardening, a strong and reliable connection is formed that can withstand a significant load. Before you begin installing the cornice, you need to mark it and check how freely the window can open after the fastening is completed. If the cornice interferes with the movement of the window frame, then you need to consider installing another model of this decorative element.
Installation of ceiling cornice on a suspended ceiling.In order for the curtain hung on the cornice to look harmonious, it is necessary that it does not lie on the window sill, but is located next to it. To do this, the size of the brackets that are attached to the wall should be longer than the protruding part of the window sill. If the installation is carried out on the ceiling, then the placement of the cornice should be shifted to the required distance. You can check the future location of the curtains relative to the window sill using a plumb line. The length of the cornice is determined based on the size of the window opening. It should be the same distance from both edges of the window. This will preserve the geometry of the room or align it somewhat if necessary. If the cornice is located along the entire length of the wall, the size of the window opening does not matter. This arrangement of the decorative element for fastening the curtains looks most harmonious if the window is located in the middle of the wall or occupies most of it. Return to contents</a>
Installation of a frame molding: recommendations
A round cornice can only be installed after its location has been marked out.
Scheme of wall mounting of cornice fromaluminum profile. If the length of the strip exceeds 2 m, then the presence of a middle fastener is mandatory. This will prevent sagging of the hung curtains in the future and damage to the cornice as a result. At the same time, it is desirable that the elements with which the curtains are mounted are removable. Then, to remove it from the cornice, you will not need to remove it entirely. After the marking with a pencil and tape measure is completed, the preliminary fitting for opening the window frame, as well as the location of the curtain relative to the window sill is completed, you can begin drilling the surface on which the cornice will be attached. This work is done using a drill with a drill that matches the type of wall or ceiling material. First, drill the first hole.
Scheme for fastening a curtain rod.First, hang the curtain rod and use a building level to check that the mark for the second fastening hole is correct. Then remove the bar and make a hole. After that, hammer in the dowels, onto which you can first apply a small layer of epoxy resin. After it hardens, attach the curtain rod brackets to the screws. In order for the structure to be completely assembled, it is necessary to thread the bar into the bracket fastening rings. This is done after all the rings for hanging the curtains have been put on. After the bar has been threaded, decorative ornaments are hung on its ends, which will serve as an additional fixator for the bar in place. After that, you can start hanging the curtains. Return to contents</a>
Mounting of rail type eaves
This type of curtain fastening is quitea new and modern solution. The main advantage of this cornice is its unlimited length, which can be changed by adding or removing sections, and the hidden location of the curtain mount. In addition, the ability to decorate the front part of the cornice with a variety of materials allows it to be placed in any interior.
Electrically controlled curtain rod mounting diagramsystems. Such cornices are equipped with elements with which it is possible to install the entire structure. In addition, restrictive elements must be attached that do not allow the brackets for hanging curtains to go beyond the rail in the final position. It is most often fastened to the ceiling, which is the accepted installation method. However, the presence of brackets in some models allows it to be placed on the wall. The work begins with marking with a pencil and tape measure. Next, on the ceiling, using a drill or a hammer drill, depending on the material of manufacture of the stream, the required number of holes are made. After this, the end parts of the cornice are screwed onto special brackets that are supplied in the kit, or using self-tapping screws. After this, the front part rail is installed. Adjusting screws will allow you to perform the final adjustment of the cornice to the size of the window opening or wall. After this type of work is completed, you can install the end restrictive parts. Return to the table of contents</a>
String tension
A metal string is used asa fastening element for curtains. It replaces the bar or rail in other models of curtain rods. It can be made of a polymer cable, which does not require additional anti-corrosion treatment. The cable is a fairly strong material that can withstand significant loads of curtains made of heavy fabrics, such as tapestry. But in order for it not to sag, it must be tensioned. The kit for installing a string curtain rod includes all the necessary installation parts: a string, brackets for attaching it, dowels, screws, boxes with which tensioning occurs. The fasteners are screwed into the dowels, the holes for which are made using a drill. A string is threaded through the holes, which is fixed with a special clamp. The same operation is done on the other side. After this, the final tightening of the string is performed. Next, a decorative box is put on, which covers the places where the string is attached.
