Walls

How to glue wallpaper in the corners of the room correctly

Rarely does a room renovation go without wallpaperingwallpaper walls. Finishing with this material gives the rooms a beautiful appearance, and with the modern abundance of options, it will not be difficult to find the right one for any interior. Before starting work, you should correctly calculate the amount of material needed for the job. To do this, it is useful to decide in advance how to glue the wallpaper in the corners. The pasting process is not very complicated, and most owners of residential premises do this work themselves. The pasting rules adopted in different houses may differ in some details, but in general, the stages of the processes are the same.The scheme of gluing wall-paper on wallsScheme for gluing wallpaper to walls.For those who are going to do the finishing themselves, but do not have much experience, it will be useful to familiarize themselves with some of the nuances of the work in advance. There are many ways to do this type of finishing, where different adhesives are used. Usually, the process of finishing with wallpaper does not cause any particular difficulties. Difficulties arise only when installing wallpaper strips in the corners of the rooms. Therefore, before you start gluing the corners with wallpaper, you should at least roughly think about how you are going to carry out this stage of the work.

Why it is difficult to paste wallpaper in the corners

Scheme for gluing wallpaper in corners.Before you hang wallpaper, carefully inspect the room where you are going to do the finishing. Despite the variety of modern technologies used in the construction of residential buildings, it is almost impossible to achieve the correct geometry in the rooms. The corners are not perfectly straight, because of this the corner joint will not be vertical either. But if the wallpaper does not lie flat everywhere, the finishing will not be beautiful. To achieve good results, you need to follow some simple rules when pasting. Check the verticality of the walls using a plumb line - for this, use a weight on a thread, for example, a nut. This will give you the opportunity to make a preliminary work plan, which you will need to follow when doing the finishing. If you have no idea how to properly glue wallpaper in the corners, try to follow some simple rules. Do not glue a whole strip to the joints of the walls. With this method, folds are sure to appear, and the joint of adjacent strips is unlikely to be even. In this case, the finishing material can also have a pattern, and this adds problems when joining the strips. When trying on the last strip of wallpaper on a section of the wall before the corner, try to leave some extra material in width. It will need to be used to apply it to the joint between the walls. The strip should be calculated so that a little material can be applied to the other wall. This will make it easier to match the joint or pattern with the strip running along the other wall. It is necessary to glue the corners with wallpaper correctly, placing the strips vertically so that there are no gaps between adjacent pieces of material. Return to contents</a>

How to properly glue corners, if they contain rosettes

How to glue wallpaper in corners where it is locatedswitch or socket, may not always be clear. The task of the wallpaperers is a little more complicated. In order to properly glue the material to this particular place, it is necessary to observe some safety precautions. It is necessary to turn off the electricity before working on this section of the wall. Remove the cover from the switch or socket, glue a strip of wallpaper on top. While the paper is wet from the glue, use manicure scissors to cut a hole of the desired shape in the location of the socket. Its size should be smaller than the diameter of the nozzle box. Then, after the cover is installed on the socket, the edges of the circle cut out in the wallpaper will remain invisible. Sometimes the corner of the room where you are going to glue the wallpaper is too uneven. Do not try to hide such a defect with new finishing material. If there is emptiness behind the strip of paper, nothing good will come of it. If you accidentally damage this place, a hole will appear in the corner, which will not be easy to hide. Therefore, it is worth spending a little time to level this section of the wall. This can be done using sealing mixtures and putties, which are widely available in hardware stores.

Comments

comments