Today, almost all windows are equipped withsuch additional structures as blinds. This is a truly unique and at the same time universal type of curtains. Unlike models made of ordinary material, blinds tend to break, so each consumer must learn how to repair them independently. These structures can be both vertical and horizontal. Horizontal blinds are especially difficult.
Due to the design features, the most difficult part is repairing horizontal blinds.
Reconstruction of blinds with their own hands
In case of any breakdown, you can contact the service centercenter, where specialists will repair horizontal blinds in a matter of seconds, but it will be quite expensive. It is best to repair the device yourself, especially since specialists assure: this is within everyone's power. First of all, be patient. The most common causes of breakdowns occur due to contamination of the mechanism or due to the fact that some elements fail. Horizontal blinds are made from the following parts:
- chain for management;
- the holder that holds the chain;
- tile lining;
- the main box;
- fasteners for fishing line;
- a stopper;
- plate;
- side covers for the box;
- jalousie.
In order to repair blinds, you need to prepare pliers and screwdrivers of different diameters, as well as wire and scissors. Return to contents</a>
Identifying the causes of breakage
List of components for horizontalclassic system blinds. If the rotary mechanism is broken, it means that the structure canvas rotates around its axis or cannot open (close). To fix this breakdown, remove the slats and plugs (side) located in the upper part of the structure. After that, dismantle the axis using pliers. The side plugs must be unclenched, and the mechanism itself - removed. Then a new one is installed, and the structure is assembled in the same order in which it was disassembled. If the slats are broken, they must be replaced. To do this, squeeze out the cord plugs and cut off the end nodes, then - pull out the lacing. If the ladders are torn, then you need to remove the canvas and plugs, after which the faulty parts are pulled out of the support. The fact is that the support is on the main axis of the mechanism, so it is removed from the cornice and the cord is pulled out. The canvas should be in your hands. This is the only way to remove the ladder. To assemble the blinds yourself, you need to install the clamps after installing the new element. The slats are threaded into the cells using wire. When assembling the blinds yourself, you need to place the jumpers on the right and left sides of the lacing, and fix the ladder with plugs. If the canvas is difficult to open, then the rotary device is checked. By the way, all experts strongly advise periodically cleaning the mechanism to avoid such situations. If the axis is damaged or bent, then the entire system jams or it begins to work completely unevenly. Of course, as in previous cases, you need to replace the axis with a new one. In case of breakage of horizontal blinds, you need to buy new elements. Today, the choice of all these parts on the construction market is huge. They can be bought at different prices. The main thing is that you can now do the repairs yourself.
