Almost all people have done it at least once in their liveswallpapering. It would seem, what difficulties can arise here? But not everyone can glue the canvases correctly. And all because even walls in the room can be seen more often than even corners. That is why many people have a question: how to glue corners with vinyl wallpaper?
The process of pasting corners with non-woven wallpaper.Tips on pasting vinyl wallpaper in corners can be useful when decorating walls yourself. To level the joints of surfaces, you will need high professionalism in using a spatula.
Quality materials for work
You will need:
Wallpaper pasting tools.
- vinyl sheets;
- glue;
- putty knife;
- scissors;
- Ruler;
- putty
As a rule, vinyl sheets are made ofmoisture-resistant materials and have an original design. The non-woven base ensures high adhesion to any type of surface. In addition, pieces of such wallpaper must be impregnated with glue, just like the walls. When the wallpaper swells from the adhesive, it will still not be possible to trim it before it dries. This is the reason why the cladding takes a little longer. When working with this type of canvas, the vents in the room are closed, and buckets of water are placed in each corner. This method prevents the glue from drying out too quickly, and the canvases from falling off from the corners. Before you start pasting the walls with vinyl wallpaper, you must turn off the electricity. The adhesive mixture must be applied from the corner, but do not allow the mass to get into the box itself. Keep in mind that you should always start gluing the wallpaper from the corner. As a rule, vinyl emphasizes surface defects, so you must completely get rid of the old coating.
Scheme for gluing overlapping wallpaper.The issue of gluing wallpaper in corners is especially relevant, since there is often a previous overlap there. It is important to note that there are various ways to glue corners with vinyl wallpaper:
Return to Contents</a>
How to properly glue vinyl wallpaper in the corners?
Wallpaper pasting diagram.
Remember that if you do not level the corner with putty,then the canvases on the next plane will turn out with bubbles. That is why it is necessary to make cuts from the end of the product to the corner in the very center of the bubbles, attach the facing material with an overlap, and treat it with an adhesive composition. Then you can start gluing the wallpaper on another plane. Keep in mind that the overlap should be done only on the pasted material. As soon as you try on a dry piece, create a vertical line along its free end on the surface that has not yet been faced. If you draw a vertical line on the overlap of another sheet, then keep in mind that the pencil is practically not removed after facing, and the decanter mixes with the adhesive mixture. Because of this, blurs are formed on the vinyl. Return to the table of contents</a>
Priming the surface: recommendations
Table of wallpaper adhesive soaking times.Immediately before gluing the corners with vinyl wallpaper, you need to prime the surface. This method can strengthen the base and reduce glue costs. In addition, the sheets on the vinyl base do not stretch: when the joint falls on an uneven surface, the seam will be visible. In this case, you need to use an overlap with cutting each sheet along the same line (and you will also need to make a vertical mark along the free end of the last piece). Vinyl wallpaper is good because they are great for cladding any base. We are talking about wood-containing boards, sheets, concrete, plaster, putty, aerated concrete, sanded plane of log walls, and so on. So how to glue vinyl wallpaper on the junction of surfaces? As a rule, sheets on the junction of surfaces outside are glued in a similar way. But you can correct the geometry of the corners much cheaper and better. For example, a polymer corner is attached to a quick-drying composition. Then a putty mixture is applied to the surface. After the walls are completely dry, they are sanded. Any irregularities can be eliminated with the help of a corner. The starting mixture dries in a matter of minutes, without delaying the cladding. Thus, the process of pasting the corners with canvases is significantly simplified. Corners free of furniture are carefully decorated, since there may be intense traffic around them. If there are significant irregularities on the walls, and the material has a large pattern, then the joint may be visible. That is why in a difficult situation when pasting wallpaper in a corner, it can be masked with decorative elements. In addition, polystyrene foam moldings are completely appropriate in the corners. They fit well with similar ceiling plinths present in each suspended ceiling system. Now the whole process is finished and you know how quickly and efficiently.
