Despite the wide variety of wallpapers, the mostpopular - vinyl. Modern modifications of wallpaper are breathable, so they can be used to decorate rooms for various purposes.
Structure of vinyl wallpaper on non-woven base. Even with small skills, you can glue wallpaper with your own hands.
Varieties of wallpaper from vinyl
The latest techniques and components have made it possiblecreate a durable and long-lasting finishing material. Vinyl wallpaper has a number of positive qualities that will please even the most sophisticated buyer. The top layer of the wallpaper is polyvinyl chloride, and the base is made of paper or non-woven fabric. Aesthetic appeal, a variety of colors, textures, resistance to ultraviolet rays, ease of maintenance allow them to be used for various rooms for a long time. There are several types of vinyl wallpaper:
Vinyl wallpaper is not recommended for use in bedrooms because it does not allow air to pass through.
- silk screen printing;
- Embossed and foamed vinyl;
- material with increased moisture resistance.
Embossed and foamed vinyl masks cracksand surface roughness, and silk-screen printing will highlight even the smallest defects, so when choosing, you need to consider these characteristics. Structural wall material allows you to give the interior a spectacular look. Compact vinyl wallpaper is durable, easy to use and imitates textiles, stone or textured plaster. Heavy vinyl creates unique effects, and silk-screen printing - an exquisite shine and respectable look, but it is used on perfectly smooth walls. It resembles textiles and looks very impressive in the interior. Decorative embossed trim is resistant to ultraviolet radiation and is easy to clean. Pasting vinyl wallpaper is not a difficult job, if you take into account the recommendations and advice of specialists. Return to contents</a>
The advantages of wallpaper with a base of non-woven
Table for calculating the amount of wallpaper.Pasting vinyl wallpaper requires experience and knowledge. Vinyl wallpaper with a paper backing must be carefully coated with a solution and left for some time to swell, which requires a significant investment of time. Material on a non-woven backing masks defects well and is easy to install. It can be quickly pasted, spreading only on the walls. It has a long service life and can be pasted in any room. Pasting non-woven wallpaper does not take much time, but the room pasted with them acquires a chic and sophisticated look. This finishing material can be vacuumed and wiped with a wet cloth. Return to contents</a>
Features of decoration with vinyl wallpaper
Wallpapering is not difficult if you take into account a few thingsFeatures and nuances. You need to start the work with marking. Vinyl wallpaper looks gorgeous, but when wet, it can stretch in width, so you don’t need to spread it with glue too much. When gluing vinyl wallpaper with your own hands, you need to carefully press it to the wall so that there are no bubbles and wrinkles. You can’t leave the wallpaper covered with adhesive for a long time.
Characteristics of dry wallpaper glue.Choose the right glue: it should be designed for gluing vinyl and other heavy types of wallpaper. When marking the strips, add a small allowance, because the wall may have different heights. Vinyl wallpaper is glued end to end so that the edges of the strips are not visible, because they are quite thick. Strips with a pattern should be selected, and not glued in a row. To glue the first strip, you need to mark a line. Step back from the corner by about the width of the tube and use a plumb line to draw a line for orientation in the work. Start working from the corner next to the window. Vinyl wallpaper is best glued at an air temperature of about 23 ° C. Do not create drafts - the material should dry evenly, without deformation and not peel off in the future. The number of rolls can be calculated taking into account the perimeter of the room, the size of the roll, the pattern of the material. Return to the table of contents</a>
Tools and materials used for work
To apply the stickers, you need to prepare the following tools and materials in advance:
Wallpaper pasting tools.
- a bucket for glue;
- scissors;
- knife;
- brush;
- roller;
- stepladder;
- level;
- roulette;
- putty knife;
- brush;
- wallpaper;
- glue.
Return to Contents</a>
Principles, nuances and stages of work
The work can be divided into the following stages:
- preparation of walls;
- putty;
- primer;
- preparation of tools and materials;
- marking and cutting;
- stirring of glutinous composition;
- wallpaper gluing.
Scheme of surface preparation for gluing.Yes, if you have experience. First, you need to remove the old finish: wallpaper, whitewash, paint. Wallpaper is soaked in a special solution or water, and then removed with a spatula. The walls must be smooth and dry. Defects are eliminated with putty, which after drying must be treated with sandpaper and wiped from dust with a damp cloth. You need to start with priming the walls at least 1 day before starting work. Prime the walls with diluted glue or a special solution, taking into account the recommendations of the instructions. Then measure the height of the wall and cut off the first strip. If the pattern does not require selection, you can cut off several strips using the first one. Glue is prepared according to the method indicated on the package. For gluing, use modern glue, which is quick to prepare: usually it is mixed with cold water and left to swell for 5-10 minutes. Then mix again, and the composition is ready. Carefully spread the canvas and leave to soak for a few minutes. Then spread it on the wall, pressing it with a brush. It is important to do this carefully, without wrinkles and bubbles. Vinyl wallpapers with a non-woven base are glued simply: only the wall is coated with the solution.
Scheme for gluing wallpaper to walls.It is necessary to ensure that the wallpaper strips fit tightly at the joints. The pattern can be selected by applying the unwound roll to the glued strip. When gluing high-quality vinyl materials, it is better not to rush with cutting several strips, but to cut them gradually, taking into account the features of the room. It is desirable that the glue does not get on the front side, and if it does - quickly remove the excess with a dry cloth. Align the wallpaper from above with a spatula or brush. Leave a small allowance near the ceiling, then bend it and cut off the excess. The edge of the sheet must be coated with glue and pressed to the wall, and the bottom of the canvas must be tucked under the baseboard. To make the gluing better, the joints and corners must be rolled with a roller, which can have different shapes: from narrow to corrugated. An important point is the junction of the wall covering and the baguette. Using a plastic spatula, press the wallpaper into the corner between the baguette and the canvas, form a fold and cut off the excess. For the job, use a sharp knife or spatula blade to make the top look nice. Pasting the next strips is done using a similar technique, you just need to match the joint and the pattern. Switches and sockets must be removed, after turning off the electricity. Near the sockets, the wallpaper can be pasted upwards, and then holes can be cut. The frieze for vinyl wallpaper is pasted end-to-end, so leave space for it in advance. To paste the wall above the window or door, use the remains of the wallpaper to save money. It is easier to paste the wallpaper together, when one controls the fit of the strip at the bottom, and the other aligns the top. It is imperative to monitor the pasted strips in order to remove air bubbles in time. They can be masked using a syringe with glue solution. If you have little experience, start pasting in the hallway or kitchen to gain skills, and only then proceed to work in the living room. High-quality pasting of vinyl wallpaper is possible even for a non-specialist, if you first study the video materials and read the instructions. Vinyl wallpaper is deservedly popular with both owners and builders. Buying vinyl wallpaper is the right choice that you will not regret. When choosing, pay attention to the special icons that are indicated on the roll packaging to get information about the methods of applying glue, characteristics, matching batch numbers and color tones.</ ul>
