In modern home interiors it is increasingly possiblemeet such a design solution as carriage coupler. With the help of such interior decoration of the house, you can create a three-dimensional surface on the wall with various options of drawings. To create drawings and patterns on the wall, special decorative nails with special heads or buttons are used. If the room in the house is large, it is recommended to use buttons, they will look more harmonious.
For carriage coupling, artificial orgenuine leather. Carriage coupler of walls is performed using upholstery materials. For this, you can use thick fabric, artificial or genuine leather. The color scheme can be any. It will depend on taste preferences, the overall style of the home interior and the color scheme in which the selected upholstery material is produced. Do-it-yourself wall decoration using the carriage coupler technique is quite a difficult job. To perform it, you need to have certain skills, so it may not be easy for novice craftsmen to cope with the task. During the work, you need to use a certain set of materials and tools.
Basic recommendations for registration
The basis of the panel for carriage coupling can beserve as plywood, chipboard or MDF. In order for the carriage coupler to be attractive and of high quality even without work skills, it is necessary to follow certain instructions. First of all, it is necessary to take into account that the panels with carriage coupler are made separately and then attached to the wall. Almost any sheet material can serve as the base of the panel. You can use plywood, chipboard, MDF. From the selected material, you will need to cut a panel of the required size. Foam rubber is glued to the prepared base. It is strictly forbidden to use nitro glue for this, as it will corrode the material. It is best to use an adhesive composition on a rubber base. You need to coat both the base and the foam sheet with glue, while you need to apply the adhesive in several layers. Each subsequent layer is applied only when the previous one dries. To proceed to the next stage of work, you will need to wait until the foam rubber is well glued to the base and the glue is completely dry. This can take about 6 hours. During this time, you can prepare a template of the future pattern of nails or buttons on thick paper. In the place where they are to be placed, you need to cut holes. In the place of these holes, you need to drill holes in the base of the panels, which will consist of the carriage coupler. Synthetic padding is applied over the foam rubber with cut holes. A furniture stapler is required to attach it. The synthetic padding must be attached from the inside. Decorative material is applied over the synthetic padding. The upholstery is attached in the same way as the synthetic padding. It is necessary to carefully calculate the efforts when stretching the upholstery material. It is necessary to distribute it so that it does not form folds, but at the same time it cannot be pulled too much so that the synthetic padding and foam rubber are not pinched. Return to the table of contents</a>
Final work
Wall panel installation diagram.After attaching the upholstery material, you need to feel the surface of the panel with your hands, forming the carriage coupler in the home environment. You need to find holes in them and make holes in the upholstery material in these places using a drill with a thin drill. The size of the holes should be about the same as a crochet hook. The crochet hook needs to be threaded through the hole from the inside and hook a cord onto it, to which a decorative button will be attached. After securing the button, the cord is pulled to the back side with a hook and attached to the panel with a stapler. The cord needs to be pulled so that the button is pressed firmly into the material. In order for the carriage coupler of the walls to be beautiful and look neat, you need to monitor the tension of the buttons. They should all be pressed into the material evenly. Holders must be attached to the back of the panels. For this, you can use special screws that will allow you to screw the panel to the wall. You can screw metal loops to the panels, and to the wall - hooks and hang the panels using these elements. It is necessary to place the fasteners so that they are hidden by the panel. Thus, the interior of the house can be made original and attractive if you make a carriage coupler in it. The furnishings of the house will become luxurious and unique. Once you have visited such an interior, you can remember it forever. This non-trivial design solution is gaining more and more popularity.
