Liquid wallpaper is a materialused for interior decoration and in appearance, more reminiscent of paint than traditional wallpaper. Due to this distinctive feature, the question of how to glue liquid wallpaper often arises.
Liquid wallpaper is a mixture of silk, cellulose and cotton with the addition of glue and color dyes.
Material Features
Liquid wallpaper is becoming more and more popular,because they have a number of advantages over paper and vinyl analogues. First of all, it is worth noting the complete absence of seams, which contributes to greater aesthetics of the room's decoration. It is also pleasing that liquid wallpaper can hide small irregularities in the walls. The material is very practical, since it does not attract dust, is safe for health, is not flammable, has good thermal insulation properties and soundproofing. The raw material for production is cellulose fibers.
Types of directions for applying liquid wallpaper.It is also worth mentioning the widest color palette and the ability to give the surface the desired texture, make drawings, which opens up unlimited scope for creativity and design imagination. If desired, you can add silver, gold and silk inclusions and threads to the composition. The finished wallpaper is similar to a textile coating and is pleasant to the touch. Wallpapering does not require special skills, there is no need to buy a large number of expensive tools, the remaining solution can be stored for a long time and used to eliminate minor defects that arise during the operation of the room. All the work from start to finish can be done independently. Return to contents</a>
Performing the preparatory work
Let's make it clear right away that the word "sticking" is notconveys the content of the work quite accurately, since liquid wallpaper is a thick composition that is rather spread on the wall than glued. They are usually sold dry, packaged in plastic bags. Your task is to properly prepare the solution. To do this, you only need a container of sufficient volume (about 15 liters) and water at room temperature. No other devices are needed. Pour the dry mixture with water according to the manufacturer's instructions on the package, stir (this must be done manually, since mixers and other mechanical devices destroy the fibers of the material), let it stand for about 30 minutes, after which you can gradually add a little water, if necessary.
Stages of applying liquid wallpaper.It is important to note that it is necessary to prepare the entire amount of the mixture at one time, otherwise the shade will be different. Ready-to-apply wallpapers are also available for sale, which have the required consistency, but their disadvantage is that they must be used relatively quickly after opening the container. Before starting work, remove old wallpaper or paint, sand the surface with sandpaper. If the walls in the room are fairly smooth, they do not require careful preparation, but deep cracks and irregularities need to be filled. In the case where the walls have multiple defects, the work will be more serious. First, you will have to perform partial or complete plastering and filling, sometimes using a reinforced mesh. Then you need to remove dust and other contaminants, treat the surface with an antiseptic and primer. There are primers on sale specifically designed for such wallpapers. A good effect is also given by applying a layer of liquid wallpaper glue - this will improve adhesion to the wall. Return to the table of contents</a>
The process of gluing
After the surface has dried, you can proceeddirectly to applying the wallpaper. For this, you will only need a universal spatula, trowel or float. Here, everything depends on the preferences of the master. If desired, you can purchase a special gun. To add texture, special rollers or figured spatulas are used. To properly glue liquid wallpaper, they are applied in small portions, section by section, and "smeared" on the wall using a grater or spatula. Usually, the recommended layer is 2-3 mm, but you should pay attention to the manufacturer's recommendations. In any case, the thickness of the wallpaper should not exceed 1 cm, as this can lead to cracks after drying. Work on a solid surface should be done in one go, without significant breaks, to avoid the appearance of joints and differences. To give strength and durability to the finished coating, it is sometimes covered with acrylic paint or varnish. Wallpaper maintenance is quite simple: you only need to periodically wipe it with a soft cloth or remove dust with a vacuum cleaner.
