When working with OSB there are some nuances thatshould be taken into account, so that the wallpapering was good. It is important that such products are 90 ° or even more composed of wood. How to paste wallpaper on the OSB, you can quickly master, if you take note of the advice of the masters. To obtain a high-quality finish, it is necessary to use the appropriate materials, which are designed specifically for solid wood surfaces. 
Wallpaper on the OSB will be able to hold only in the event,if they are pasted on a paper base. If desired, almost any finish can be used for such boards. They are painted, shpatlyuyut, varnished and, of course, paste on such surfaces wallpaper.
Tools and materials
Scheme of preparing walls for wallpapering. When planning to paste wallpaper on the OSB, you should prepare the usual set of tools used in this type of construction work:
- putty knife;
- brushes;
- sandpaper;
- primer;
- dry cloth;
- ladder;
- wallpaper;
- tape, painting tape;
- work clothes.
When sticking on the wallpaper OSB traditional approachesare not the best. The plate itself has a high absorbency. This means that you can not paste wallpaper simply by using glue. The composition of the glue contains water, the stove will swell, and the pasted wallpaper will eventually fall, spoiling all work. Therefore, to prevent this from happening, and the wallpaper adhere well, a number of preparatory measures are required. Back to contents</a>
How to prepare the surface of OSB
The scheme of gluing wallpaper in the corners. This stage of repair should be given special attention. The fact is that the wallpaper on the OSB can be kept perfect only if it is glued to the paper base. So you have to start by sticking a paper layer on the board. The plate itself often has various defects in the form of slits that form at the joint of the sheets. You can get rid of them by applying wood shpatlevku. Allow it to dry, then it can be primed. When the primed surface is ready for further processing, you can proceed to the paper gluing. To glue the joints, you can use an ordinary adhesive plaster. Although some use even scotch, which largely repeats the relief, it is subject to mechanical damage. In addition, if the gaps are deep, you can apply acrylic for filling them. Plasticity is preserved, there is no obstacle to progress. Further, over the acrylic layer is superimposed a scotch tape. The option is a lot, so choosing the most affordable method will not be difficult. What kind of paper should I take to ensure smoothness and excellent surface quality? As with the version with plaster, you can use almost any. The main thing here is that it is not oily, too thick and that its structure does not have bumps. When sticking paper, use a trowel, you can take a clean rag, but always dry. The paper can be glued overlap. Back to contents</a>
Features of gluing wallpaper
The order of gluing wallpaper by one person. Experts argue that the process of gluing wallpaper on the OSB, despite the fact that it requires special attention and care from a person who will perform the work, does not require special knowledge in this matter. Even a novice master is able to cope with such work. After the putty has dried, it is necessary to make a very thorough grinding, as it is necessary to remove the grooves left by the spatula. Than to make such grinding? If you use a grinder, you will get an excellent result in a shorter time. If such a machine is not at hand, you can do the work by hand, using a special grater, on which sandpaper is fixed. In this case, the processing on such panels is carried out with light pressure, semicircular movements. In this way practically all the defects that occurred during the shpatlevaniya are eliminated. Then the polished surface is further processed with a brush, this process is considered complete. Now the wallpaper will perfectly sit on the surface, there will not be random sand grains appearing through the canvas. In addition, you can use liquid wallpaper, which on the OSB is applied on the same technology as on other walls. Back to contents</a>
Features of OSB
Technical characteristics of OSB sheets. In order to properly master the techniques for gluing wallpapers on the OSB, one should have an idea of the features of this building material. Plates are made of wood chips, the basis of which is a synthetic resin. The process is carried out under the influence of pressure and a certain thermal regime. Primer is necessary in order to not only get a perfectly smooth surface, but also to create insulation from the possible emergence in the future on the coating of resins, natural oils, pigments and tannins. When choosing glue, it is better to stop on a professional version. But it is important here whether you are going to shoot these wallpapers in the future or intend to only repaint them many times. Primer is preferable to water repellent, and good adhesives should be added to the putty, for example, "Kleiberite". If in advance, before the putty, there is a targeted paint net, an additional coupling with the OSB is provided. Therefore, you can glue almost any wallpaper. Taking into account these details, you will independently make the wallpaper wallpapering on the OSB. </ ul>
