Nowadays, almost every window inapartment and office, equipped with blinds. His invention has become so popular and convenient that it has become an integral part of our lives. Therefore, many are interested in the question of how to attach blinds with their own hands.
Blinds on the windows protect from prying eyes and strong sun.
Types of blinds and their differences
Blinds are divided into three main types— horizontal, vertical and roll. Until now, there are people who think that blinds spoil the interior. They just do not know that now there are many options for their manufacture from various materials. You can buy: aluminum, plastic, bamboo, wood, fabric and other options. The choice is so wide that there is an option for the most sophisticated designer taste.
Installation of vertical blinds.The option with vertical blinds is used mainly in office decoration. However, it is also quite possible to decorate living rooms with them, to replace curtains and drapes. It is possible to mount them to the ceiling or to the walls near the window. The horizontal type is the most common. They are hung either along the outer edge of the window, or inside the window opening, or on both window sashes. Depending on the method of fastening, the methods of performing the work also differ. Roller options have gained their popularity quite recently. They are as invisible as possible when rolled up, and when unrolled, they are completely indistinguishable from other types of blinds, in addition, they look quite stylish. Blinds perform several functions, first of all, like curtains, they perfectly close the interior space from active sunlight, which protects the interior from fading. Blinds are very easy to wash, and finally, they can completely replace curtains in terms of functionality. Return to contents</a>
Window measurements before blinds order
Installation of horizontal blinds BeforeTo attach blinds to the wall, you need to take the necessary measurements. Be careful, it is better to take measurements several times than to attach them incorrectly and dismantle them. If the windows have a non-standard shape, for example, in the form of an arch, contact the measurers from the manufacturer. For vertical blinds, it is very easy to take measurements, you need to take the dimensions of the window areas. Since this type is attached in different ways, the measurements are taken taking into account the mounting location. It is better to get the size exactly right, because the vertical type of blinds can only be changed in height (downward), in width, if it is not enough, you will not be able to add it. Since horizontal blinds are attached in three ways, the measurements are taken taking into account the mounting method. For example, when there is a need to hang blinds over a window opening, you need to measure the opening in width and height. Set the height according to the design project, even to the floors, if you plan to hide the heating radiators. The most classic option is when the blinds hang slightly below the window sill. When the width of the window sill does not allow it to be covered, then you will have to specify the height to it. In the horizontal type of blinds there is a mechanism that provides for adjusting the opening height.
Scheme of blinds with opening mechanism.When you need to hang blinds right next to the window, in the window opening itself, then this method of fastening is suitable only for fixed windows. Since it will be inconvenient to open the windows with such fastening. For the option with the ability to open the window, another fastening option will be required. Blinds are hung on the sashes separately. Measurements must be made according to the size of the glass, with an adjustment of plus a few centimeters, for the length and 0.5 cm from the edge. When taking measurements, look at the fittings, perhaps they will interfere with the operation and installation of the blinds. The place of fastening of the roller type of blinds is either above the window opening, or on the very edge of the window slopes, or on the walls. To take measurements, use the rules as for the previous type of blinds. Often, over the roller blinds, which, for example, shade the windows, curtains are hung over. In this case, the mechanism must be positioned so that it is not covered by the curtains. It is important to remember that in addition to blinds made to individual sizes, there are much cheaper options with standard fabric sizes. Therefore, it is quite possible to save money significantly by adjusting the desired sizes to the manufacturer's standard mesh. Return to contents</a>
Technology of fastening of louver
Scheme of fastening blinds to the window. In principle, all types of fastening are arranged in the same way and include the following elements:
- linen (set of lamellas);
- staples with a latch;
- control mechanism;
- lower bracket.
The bracket with a latch is fixed either to the walls,or on the windows or on the slope, and the canvas is attached to it. The lower holder is needed to fix the blinds, with this element, the blinds do not move in the wind, do not wrinkle. First, measure the width of the canvas and draw a line horizontally. Be sure to use a level, because at this stage it is easy to ruin the work. Next, mark the points for attaching the brackets. They are fixed according to the markings, and very tightly, since they hold the entire weight. Guided by the attached instructions, assemble the control mechanism and the canvas. Now, in turn, moving the latches on the bracket, snap the blinds. Some are afraid to attach blinds to plastic windows, believing that this will spoil the tightness of the window. This is not true, fastening to the frame is possible and completely safe for the window. If trouble happens and the hole is drilled in the wrong place, it is easily hidden on the frame with white silicone sealant. If there is a need to fasten corners near the glazing beads, it is better to refrain from this. The glass near the glazing beads passes very close, so it is very easy to damage the glass unit. Blinds cannot be washed in a washing machine, you just need to soak the entire lamella in a grease cleaner, hold it for a while and wash off the foam with water, then wipe the lamella with a rag and all the dirt will come off. Handle the mechanism carefully, because this will ensure its long and proper operation.</ ul>
