Laying a laminate on the walls: a few tips

The use of natural wood, MDF panels,when the decoration of the walls is done, creates an original appearance in the room. The room becomes respectable, looks a lot more aesthetic. But the cost of such materials is very high. People can not get them with an average salary. We have to look for an alternative. Layout of the laminate. One of them is laying the laminate on the walls. I must say that for this you can use the cheapest types of this material. Laying the laminate on the walls is completely accessible to any home master. Advantages of using a laminate for wall cladding:

• low cost;
• appearance;
• large palette of flowers;
• a variety of textures;
• excellent hygienic characteristics;
• ecological compatibility;
• easy installation;
• continuous operation.

Laminate characteristics table.Since the laying of laminate on the walls is always carried out indoors, the wall surface does not experience powerful external influences. Thanks to this, the laminate can retain its functional properties for a very long time. The appearance remains unchanged and always attracts attention. When the laminate is laid on the wall, the interior does not suffer, it is in harmony with any design of the apartment. However, it has several limitations when it is used as a wall decoration material. It cannot be used when indoors:

• high humidity;
• constant temperature fluctuations.

From the presence of such nuances the laminate can begin to swell, its warping will become noticeable. Therefore, it is forbidden to use the material in specific rooms:

• You can not put a laminate on the wall in the bathroom;
• installation of the laminate is not done on the balcony;
• The laminate is not installed in the basement.

Preparatory work

How to lay the laminate on the wall, when the constructionpanels is not designed for grip with a wall? To make this possible, you must first obtain an absolutely flat surface. For this you can take a regular plywood. The best material for such installation are the OSB plates. They practically never exfoliate. Back to contents</a>

How to perform self-installation and fix the laminate on the wall?

Tools for laminate mounting. First of all, it is necessary to obtain an even surface. The simplest way for a plastered wall is plasterboard panels. To install the laminate and fix it, you will need liquid nails. Panels of laminate simply keep liquid nails. Laying the laminate on the wall can be fixed with adhesive solution. When the glue solidifies, the laminate will retain its elasticity, its strength characteristics will not change. However, with such an installation there are several significant factors. To lay a laminate on the wall by glueing, it is necessary to have:

• laminate sheets;
• liquid Nails;
• PVA;
• gon ornamental.

The glue must be applied simultaneously from both sides. Lubricates the surface of the wall and the material. The PVA glue is applied with a continuous layer. When laying sheets of laminate with the use of "liquid nails" you need to apply the adhesive solution with dots to any surface. The first panel sticks very firmly. She should not have any liberties. For its better fixation, it is nailed in small studs, through the inner lock directly to the wall. For this operation, two nails are sufficient. Types of laminate surfaces. At the very bottom it is necessary to make a special emphasis, intended for the initial line. Otherwise, the laminate panels under pressure of their own weight will begin to creep slowly. Laminate boards during installation do not need to be pinched - they just need to be inserted and snapped tightly against the wall. The lower board during surgery should be slightly held. Each row of boards must have a shear of the lateral joints during assembly. One option is to assemble the laminate board and then glue it to the wall. But if the walls have large dimensions, then this option is not good. Back to contents</a>

How to fix the laminate to the wall?

Such a floor covering looks great onwall. Why do people try to mount a laminate on the wall? To make a quick wall decoration, the use of MDF panels became classic. However, the laminate has several undeniable advantages over such material:

Its strength is much higher than MDF panels. It is capable of withstanding large mechanical loads. In addition, the laminate has a low hygroscopicity. It has a very high density, since its inner surface is protected by a polymer layer.

Laminate flooring is easy to maintain. It can be safely washed with any detergent, which contains no aggressive substances.

The negative side of the laminate is its cost. It exceeds the price of wall panels several times.

When the laminate is attached to the wall, there are several characteristic problems: Technology of wall finishing with laminate.

The mass of the material is large enough.

The surface on which the material will be fixed must have high strength.

Even with a low hygroscopicity, when the humidity changes, the base of the material made of cellulose begins to swell.

The most common type are panels,having a click lock. It is made with the expectation of rigid fixing of panels. However, if self-tapping screws were used, their bonnet always prevents the tight closing of the lock. There remains an ugly groove.

From the above we can draw the following conclusion:

Fastening of products should be carried out only on a surface having increased strength. At low strength, a massive coating together with gypsum plasterboard can collapse.

For rooms of high humidity, this material is not suitable. Premises such as a bathroom, a bathroom and a kitchen need to be finished with other materials.

Only in those rooms where there is moderate humidity, it is allowed to install a laminate.

Do not rigidly fix the panels. You must always maintain the elasticity of the coating. Panels should be able to move at minimum distances.

Installation using self-tapping screws should not touch the lock of the laminate panels.

Back to contents</a>

A few tips of masters

To obtain a more reliable fixation of the coatingwalls laminate, you can use mounting rails, covered with stain. Such a wall with its appearance will look like a half-timbered house. For this work, the holes in the laminate panels, where the slats will be fastened, should have a diameter slightly larger than the diameter of the screws. Thus, it is possible to avoid rigid installation of the laminate to the wall. For this type of attachment, the most simple solution will be liquid nails. For the fastening of laminate plates on the wall, a frame is made, which is a crate. For its manufacture, wooden slats are taken. They are assembled so that it remains possible to attach a plywood sheet. The manufactured crate is exposed according to the level. No wave surges are allowed. The flatness of the wall should be exactly the same as the flatness of the floor. An error of two millimeters is allowed from the calculation of one running meter. If the walls have a smooth sheathing of OSB slabs, laminated panels can be mounted on them.

Comments

Comments