How to build a large house in a limited area: an example from the Moscow region

From our article today you will learn howto fit a house between trees, where which rooms are best located and how else to use the roof of the house. And, of course, you will see one of the most stylish houses in the Moscow region. Mr. R., the customer of this project, first of all demanded that the architects save the life of all the trees on his plot of almost two hectares. Actually, it is for this reason that the foundation of the future house was placed on only 300 sq. m, while the total area of the house being erected was 560 sq. m. Arseniy Borisenko, Petr Zaitsev, architects Founders of the architectural studio za bor zabor.net Another feature of the house is quite unusual.layout: the house is divided into two wings. However, the zoning itself is done in a completely traditional way - the first floor is given over to public areas, the second - to private ones, from here you can also get to the roof, prepared by the architects for exploitation of any direction. One of the roof fragments, located between the wings of the house, is perfect for both picnics and sunbathing. There is also a technical basement here.floor, allocated for communications and equipment, and a wine cellar. The frame of the house is a monolithic reinforced concrete structure of columns and floors. The walls are made of brick, one of them is made at an angle. The second floor has two balconies and a loggia. Incidentally, the latter is adjacent to the study and is equipped with a glass canopy to protect against precipitation. Almost every line of this house is successfulworks on the overall aesthetic impression, and even the thin drain pipes are made of stainless steel, raised above the roof level and mounted at a common angle with the sloping wall. zabor.net